L75 / 120LT Dilatometer
Tarvitsetko apua?
Autamme sinua löytämään oikean ratkaisun. Tarjoamme tukea, huoltoa, kalibrointia ja koulutusta kaikille tuotteillemme. Ota yhteyttä palvelusopimusta varten!
Huolto & Korjaukset Tarjouspyyntö
The Linseis dilatometer L75/120LT was developed to measure the expansion of polymer samples. Hereby up to 8 different samples can be measured simultaneously in a temperature range of –40°C up to +160°C. To cover the temperature range a commonly available climate chamber is used that incorporates a cooling generator and a heat source. The measuring sensors are mounted on top of the heat chamber and connect through a hole into the chamber. The complete arrangement is airtight, in order to avoid the intrusion of humidity into the measuring chamber.
Optionally a humidity chamber can be selected to control both temperature and humidity in the sample chamber.
Tietolomake
Ota yhteyttä
Chris Bradburn
- Myynti - Materiaalianalyysi
- Puhelin: +46 (0)18-56 68 09
- Matkapuhelin: +46 (0)70-396 18 88
- chris.bradburn@gammadata.se
Tekniset tiedot
| Linear measurement range: | +/-1300um(+/-0,5%FS) |
| +/-1600um(+/-2,0%FS) | |
| +/-1400(+/-1,0%FS) | |
| +/-1800(+/-10%FS) | |
| Resolution: | 1.25 um |
| Measuring principle: | LVDT (differential transformer) |
| Automatic zero adjustment: | Yes |
| Sample load: | (adjustable) 50 up to 500 mN |
| Sample holder material: | Fused Silica |
| Sample dimension: | 4 x 10 x 80 up to 100mm |
| Temperature range: | -40°C up to +160°C |