TMA PT1000 – thermomechanical analyzer
Need help?
We help you find the right solution. We offer support, service, calibration and training for all our products. Contact us for a service agreement!
Service & reparation Request a quoteThe design of the LINSEIS TMA PT1000 Thermomechanical Analyzer guarantees highest precision, reproducibility and accuracy. The system was constructed to perform a variety of Thermomechanical experiments on an array of sample shapes and sizes over a wide temperature range to meet all TMA needs. The system can perform either static or dynamic measurements due to a built in force/frequency generator.
Typical materials under investigation are: composite materials, glass, polymers, ceramics and metals. The variety of measuring systems allows sample geometries such as fibers, rods, films, rods or cylinders.
TMA / DTMA Features
With low constant load:
- Linear thermal expansion evaluation
- Change of volume
- Phase transformation
- Sinter process evaluation
- Softening point determination
- Transformation points
- Swelling behavior
- Tension
With increased constant load:
- Penetration
- Transition and comparison tests
- 3 point bending test
With dynamic load:
- Visco-elastic behavior
Additional optional features:
- DTA evaluation
- (RCS) Rate controlled sintering software
Data sheet
Contact
Chris Bradburn
- Sales - Materials Analysis
- Phone: +46 (0)18-56 68 09
- Mobile: +46 (0)70-396 18 88
- chris.bradburn@gammadata.se

Technical specification
Model: | TMA PT1000 | TMA PT1000 EM |
Temperature range: | -150 up to 1000°C | -150 up to 1000°C |
-260 up to +220°C | -260 up to +220°C | |
Sample size: | 30 mm | 30 mm |
Force: | up to 1 or 5.7 N | up to 1 / 5.7 / 20 N |
Frequency: | 1 or 5 Hz | – |
Resolution: | 0.125 nm | 0.125 nm |
Atmospheres: | red., inert, oxid., static/dyn. | red., inert, oxid., static/dyn. |
Electronics: | Integrated | Integrated |
Interface: | USB | USB |