Miniature, single phase, 45 kHz
Need help?
We help you find the right solution. We offer support, service, calibration and training for all our products. Contact us for a service agreement!
Service & reparation Request a quoteFEATURES
- Current and voltage input
- Working frequency up to 45 kHz
- Adjustable sensitivity, time constant and phase
- Local and remote control
- Compact and EMI-shielded case
X output,10 Hz-45 KHz, 50dB dynamic reserve, time constant up to 10 s, 3 µV to 100 mV switchable sensitivity
TWO WAYS OF PROGRAMMING
The amplifier settings – e.g. phase, gain, time constant – are controlled either by switches directly on the amplifier module or externally using a standard digital I/O computer board. The variable working frequency is determined by an external reference signal which may be e.g. the synchronization signal of a chopper wheel or the modulation signal of a laser. The current input is well suited for amplifying signals from high impedance sources like photodiodes or PMTs while the voltage input can be used to measure signals from low impedance sources like pyros or coils.
Standard delivery time: 3 weeks ARO, Conditions: Ex.Works Germany unless specified
Data sheet
Technical specification
| Model | LIA-MV-150-S Standard |
|
| Voltage Input | BNC connector Single-ended Instrumentation amplifier Noise 12 nV/√Hz |
|
| Current Input | BNC connector Transimpedance amplifier, gain 1 kV/A Noise 13 pA/√Hz |
|
| Sensitivity (Full Scale) |
Voltage: 3 µV to 100 mV, switchable in 1-3-10 Current: 3 nA to 100 µA, switchable in 1-3-10 |
|
| Working Frequency | 10 Hz – 45 kHz | |
| Reference Input | ±100 mV to ±5 V, switchable to TTL | |
| Phase | Adjustable 0° – 360° (8-bit resolution), Temperature drift <0,01°/K |
|
| Demodulator | 50 dB max. dynamic reserve | |
| Time Constants | 3 ms to 10 s, switchable in 1-3-10, slope switchable 6 dB or 12 dB/octave | |
| Output | X [R · cos(angle)], ±10 V full scale, short-circuit protected | |
| Digital Control | 16 TTL, CMOS, opto-isolated 8 Bits phase, 4 Bits time constant, 4 Bits sensitivity |
|
| Power Supply | ±15 V, 100 mA typ. | |
| Case | 170 x 60 x 30 mm (L x W x H), Weight 370 g | |
Power supply via 3-pin Lemo® socket. A mating connector is provided with the device. Optional power supply PS-15 available. For further information please view the datasheet.