Platinum Coater
Tarvitsetko apua?
Autamme sinua löytämään oikean ratkaisun. Tarjoamme tukea, huoltoa, kalibrointia ja koulutusta kaikista tuotteistamme. Ota yhteyttä palvelusopimusta varten!
Huolto & Korjaukset Tarjouspyyntö
The LUXORPt is a highly innovative, fully automated sputtering device which applies a fine grain platinum or gold coating from 1 to 100 nm thickness.
LUXOR’s unique A² technology assures that the gold or platinum is sprayed in a highly controlled and precise manner, resulting in an extremely uniform, thin and homogeneous coating.
This allows your scanning electron microscope to show the best possible image quality.
Ota yhteyttä
Ramin Lindqvist
- Myynti - Materiaali Analyysi
- Matkapuhelin: +358 (0)400 570 760
- ramin.lindqvist@gammadata.fi
Tekniset tiedot
System:
- Pt or Au coating with air or argon
- Maximum capacity: 7 x Ø 12.5 mm or 3 x Ø 25 mm stubs
- Average coating time: 4 – 5 minutes (based on resp. 2 nm or 4 nm platinum coating)
- Average coating time: 5 minutes (based on a 10 nm gold coating)
- Vacuum & drying modes
- Low energy dual stage pump
- Vacuum & drying modes: 7 Pa to 150 Pa (continuously selectable)
- Au/Pt layer thickness: 1 to 100 nm (continuously selectable)
- Process time: 1 to 600 minutes (continuously selectable)
- Process chamber: Borosilicate glass Ø 100 mm x 150 mm height
- Implosion shield: PET Ø 120 mm x 150 mm height
- Vacuum connector: DN 16 KF
- Gas supply: Air or argon (0,6 bar)
- Dimensions: 340 x 340 x 290 (mm, W x D x H)
- Weight: 12,5 kg