SA-32 Alpha Probe
Tarvitsetko apua?
Autamme sinua löytämään oikean ratkaisun. Tarjoamme tukea, huoltoa, kalibrointia ja koulutusta kaikista tuotteistamme. Ota yhteyttä palvelusopimusta varten!
Huolto & Korjaukset Tarjouspyyntö
The SA-32 probe for measurement of surface contamination is designed to be used with CSP meter such as RDS-32, Radiagem, MIP-10, Avior or Colibri. Its ZnS(Ag) detector with 32 cm² detection area gives good performance for direct measurement of alpha emitters on glove boxes, small areas and for personal self control. The sensitivity to gamma and/or neutron dose-rate has been reduced to minimize the risk of false positive alarm even in high dose rate environment.
The SA-32 probe includes a hand screwed protection grid that is very easy to remove for decontamination. When the grid is detached, the scintillator becomes available for replacement if necessary, reducing the time to service.
- Alpha surface contamination measurement
- 32 cm² ZnS(Ag) scintillation detector
- Belongs to CSP family
- Calibration via PC software
- Robust screwed-on grid simple to decontaminate
- Easy to change scintillator
- Very low sensitivity to neutron and gamma field
Tietolomake
Ota yhteyttä
Toni Kansanoja
- Myynti - Säteilymittaus
- Matkapuhelin: +358404824356
- toni.kansanoja@gammadata.fi
Liittyvät tuotteet
RDS-32
RDS-32 is a compact survey meter using an energy compensated GM-tube as primary detector, completed with a diode in the wide range version. Probes...
Colibri
High end hand held instrument with some really neat features and several probes. Available in two versions Colibri VLD – Very Low Dose rate,...
SAB-32
The SAB-32 probe for measurement of surface contamination is designed to be used with CSP meter such as RDS-32, Radiagem, MIP-10, Avior or Colibri....