DBR-2 – DIS Dosimeter Reader
Tarvitsetko apua?
Autamme sinua löytämään oikean ratkaisun. Tarjoamme tukea, huoltoa, kalibrointia ja koulutusta kaikista tuotteistamme. Ota yhteyttä palvelusopimusta varten!
Huolto & Korjaukset Tarjouspyyntö
The DBR-2 Dosimeter Reader is designed to read DIS-1, DIS-1H3 and EDIS-1 dosimeters assembled in the DDH snap-in dosimeter holders. The dosimeter is simply inserted into the reader head slot for dose read-outs. The design of the slot prevents the dosimeter from being inserted incorrectly. The reading goes in a couple of seconds and the Hp(10), Hp(0.07), Hp(3) or H*(10) doses are shown on the display and stored in a local buffer memory.
Difference between DBR-1 and DBR-2 is that DBR-2 has no capability to do hardware reset of the dosimeters.
Tietolomake
Ota yhteyttä
Stefan Mårtensson
- Myynti - Säteilymittaus
- Puhelin: +46 (0)18-566803
- Matkapuhelin: +46 (0)76-8265837
- stefan.martensson@gammadata.se
Tekniset tiedot
Metal casing
Dimensions 250 x 80 x 280 mm (WxHxD)
Weight 3.15 kg
Showing: Hp(10), Hp(0.07) ,Hp(3) and Hp*(10) doses
Real time clock
Calibration check with DBR Reader Calibration Plug
Associated software: WinELD software
Communication: Ethernet, RS-232
Temperatures: +10°C – +40°C, non-condensing environment
Connection: 15VDC, 0.5A
Built-in battery: 1.2 Ah, ~8 hours of operation
Liittyvät tuotteet
DBR-1 - DIS Dosimeter Reader
The DBR-1 Dosimeter Reader is designed to read DIS-1 and EDIS-1 Dosimeters assembled in the DDH-2 Snap-in Dosimeter Holders. The Dosimeter Badge is...
DIS-1 - Direct Ion Storage Dosimeter For Hp(10) and Hp(0.07)
The DIS-1 personal dosimeter is based on an ionization chamber combined with a modern electronic Direct Ion Storage (DIS) memory cell. The dosimeter...