TLD Heat – own
Tarvitsetko apua?
Autamme sinua löytämään oikean ratkaisun. Tarjoamme tukea, huoltoa, kalibrointia ja koulutusta kaikista tuotteistamme. Ota yhteyttä palvelusopimusta varten!
Huolto & Korjaukset Tarjouspyyntö
The TLD annealing oven TLD Heat has specially been developed for thermoluminescent dosimetry. It is used for the annealing of TLDs before irradiation and for preheating after irradiation and before reading by a TLD reader.
The stainless steel heating chamber with air circulation is characterized by its excellent temperature uniformity. Reproducible heating and cooling cycles are essential for thermoluminescent dosimeters to maintain constant sensitivity and low background readings. Easy to use and versatile TLD Heat is suitable for annealing of all typical TLD elements like chips, discs and rods. It is supplied with a stainless steel annealing tray and an aluminum cool block for rapid cooling. It has a PC interface and Win software for easy and flexible programming and saving of any required heating profile for preheat and anneal of TLD material to a maximum temperature of 400°C.
Tietolomake
Ota yhteyttä
Stefan Mårtensson
- Myynti - Säteilymittaus
- Puhelin: +46 (0)18-566803
- Matkapuhelin: +46 (0)76-8265837
- stefan.martensson@gammadata.se
Tekniset tiedot
Door: swing door hinged on the left
Heating: side heating with horizontal air circulation
Cooling: exhaust air flap
Housing material: stainless steel
Chamber material: stainless steel
Insulation: ceramic fibre
Temperature: max 400°C
Controller accuracy: ± 1 K
Heating rate max: ca. 25 K / min
Cooling rate max: ca. 20 K / min
Capacity (one cycle): 3 annealing trays
Heating profiles: Free programmable by oven software
PC Interface: USB
Voltage: 230 V
Power: 1.5 kW
Chamber size: 95 mm x 90 mm x 105 mm (H x D x W)
Dimensions: 430 mm x 410 mm x 300 mm (H x D x W)
Scope of delivery: TLD Heat, Windows based oven software Thermosoft, RS485 to USB adapter with cable, 1 annealing tray, 1 cool block
Weight: ca. 22 Kg (net); 35 kg (gross)