Föregående
Se fler

Benchtop, Single phase, 120 kHz Amplifier

Need help?

We help you find the right solution. We offer support, service, calibration and training for all our products. Contact us for a service agreement!

Service & reparation Request a quote
          FEATURES
  • BNC Connectors for Input and Output Signals
  • Rugged Aluminium Housing
  • Working Frequency 50 Hz … 120 KHz
  • Digital Phase Shifter 0 … 360°
  • Parameter Control by local Switches and opto-isolated digital Inputs
  • Optional Reference Oscillator Module available
  • Adjustable sensitivity, time constant and phase
  •  Designed as alternative to expensive digital desktops

X output, 50 Hz-120 KHz, 80dB dynamic reserve, time constant up to 1 s, 3 µV to 1V switchable sensitivity

 PROGRAMMING THE LOCK-IN MANUALLY OR BY COMPUTER

The Series LIA-MV(D)-200 Lock-In Amplifiers are designed as stand-alone units which can be programmed both manually by front-panel switches and remotely by a digital interface. By using a PC with a standard digital I/O card all main settings for sensitivity, time constant and phase shift can easily be controlled. Therefore, the Series LIA-MV(D)-200 Lock-In Amplifiers are the ideal tool for integration into complex or automated test systems as well as for use as standard lab unit in cost-sensitive applications.

Data sheet

Technical specification

Model LIA-MV-200-H
Single Phase
Working Frequency 50 Hz … 120 kHz
Time Constants 300 µs – 1 s
6 or 12 dB/Oct.
Outputs (BNC) X = in phase,
±10 V full scale,
Short-circuit protected,
Signal monitor output
Sensitivity
(Full Scale)
Voltage: 3 µV – 1 V in 1-3-10 steps
Current: 30 pA – 10 µA in 1-3-10 steps
Voltage Input (BNC) Instrumentation amplifier, noise 12 nV/√Hz
Current Input (BNC) Transimpedance amplifier, gain 100 kV/A, noise 0.4 pA/√Hz
Signal Filter Highpass 0.2 Hz – 1 kHz and lowpass 100 Hz – 1 MHz, user selectable
Reference Input (BNC) 100 mV to 5 V, switchable to TTL
Phase Adjustable 0° – 360° with 8 Bit resolution,
Temperature drift <0,01°/°C
Max. Dyn. Reserve 80 dB
Digital Control 16 TTL/CMOS inputs: 8 Bit phase, 4 Bit time constant, 4 Bit sensitivity
Power Supply ±15 V, +120 mA / -60 mA
Dimensions 223 x 105 x 65 mm (L x W x H), Weight 1,000 g (2.2 lbs)

 

The optional Reference Oscillator SOM-1 can be connected by an extension connector inside the module. Power supply via 3-pin Lemo® socket. A mating connector is provided with the device. Optional power supply PS-15 available. For further information please view the datasheet.

We use cookies on your website to give you the best experience. Read more here.