Syringe Shield Lead Glass
Need help?
We help you find the right solution. We offer support, service, calibration and training for all our products. Contact us for a service agreement!
Service & reparation Request a quoteSyringe shields with lead glass viewing window for optimal visibilty of the syringe. The clip-lock mechanism will make sure that the syringe is held in place. The anodized aluminum end cap is lined with 2 mm tungsten shielding on the inside to also provide shielding at the clip-lock mechanism, where the lead glass is not able to reach. This makes sure that you are optimally protected. The lead glass has been designed with rounded edges to increase the strength. Our standard tungsten syringe shields have 2 mm tungsten shielding and are equipped with a small lead glass viewing window.
- Optimal visibility with 360° viewing window
- Rubber O-ring for lead glass protection
- Quick & easy Clip-Lock mechanism
Data sheet
Contact
Stefan Mårtensson
- Sales - Radiation Detection
- Phone: +46 (0)18-566803
- Mobile: +46 (0)76-8265837
- stefan.martensson@gammadata.se
Technical specification
Finishing material: Anodized aluminum
Shielding material: Tungsten 2 mm
Glass: Lead glass 7 mm (with 5,2 density) equivalent to 2,5 mm lead
Weight: appr. 175 g
1 ml (Green)
SS2LGCL1-1 = 8.8 x 72 mm
SS2LGCL1-2 = 8.8 x 76 mm
SS2LGCL1-3 = 11.5 x 76 mm
2 ml (Silver)
SS2LGCL2-4 = 11.5 x 53 mm
SS2LGCL2-5 = 11.5 x 60 mm
3 ml (Yellow)
SS2LGCL3-6 = 11.5 x 56 mm
SS2LGCL3-7 = 11.5 x 69 mm
5 ml (Blue)
SS2LGCL5-8 = 15.4 x 61 mm
SS2LGCL5-9 = 15.4 x 65 mm
SS2LGCL5-10 = 15.4 x 68 mm
10 ml (Red)
SS2LGCL10-11 = 18.2 x 75 mm
SS2LGCL10-12 = 18.2 x 85 mm
Related products
Syringe Shield Clip-Lock
Tungsten syringe shield for syringe with clip-lock to secure the syringe into position during the elution process. The anodized aluminum outside...
