Geometry Sources – Isotrak
Tarvitsetko apua?
Autamme sinua löytämään oikean ratkaisun. Tarjoamme tukea, huoltoa, kalibrointia ja koulutusta kaikista tuotteistamme. Ota yhteyttä palvelusopimusta varten!
Huolto & Korjaukset Tarjouspyyntö
Mixed or single radionuclide solutions from Isotrak are incorporated homogeneously into a plastic resin which is then poured into the container and allowed to set. The active resin is normally covered by a layer of inactive resin. A lid is fixed to the container to make a sealed, solid, source. Gas equivalent sources are prepared by combining the active solution with plastic foam
Standard geometries
– 1 litre Marinelli beakers (own Geometry)
– 1 litre plastic bottles (own Geometry)
– Marinelli beakers (type GA-MA)
– Simulated filters
– Simulated gas standards (type GA-MA)
Densities
– 0,02 g/cm³ gas equivalent 1 atm
– 0,1 g/cm³ gas equivalent 10 atm
– 0,2 g/cm³ gas equivalent 20 atm
– 0,5-0,6 g/cm³ gas equivalent to granulated charcoal
– 0,97 g/cm³ water equivalent
– Any density 0,1 – 3,0 g/cm³
– Other densities on request
Tietolomake
Ota yhteyttä
Stefan Mårtensson
- Myynti - Säteilymittaus
- Puhelin: +46 (0)18-566803
- Matkapuhelin: +46 (0)76-8265837
- stefan.martensson@gammadata.se

Liittyvät tuotteet
Simulated gas standard

Simulated-gas standards provide calibration for gamma spectrometers over a wide energy range. The standards are prepared using Analytics mixed...