SPIR-Explorer
Need help?
We help you find the right solution. We offer support, service, calibration and training for all our products. Contact us for a service agreement!
Service & reparation Request a quoteThe drone sensor SPIR-Explorer allows detection, measurement of dose rate and identification of radiological sources. It is intended to be mounted on demanding carrier, such as drones (UAV) or robots. It may also be used within fixed or deployable systems. Typical uses are searching for any unexpected radiological sources or mapping of contaminated areas. Operation is fully automated and results are shown and memorized at an associated radiological base station. The sensor uses proven identification techniques from SPIR-Ident and SpiR-ID product family in a smaller and lighter form factor.
Take advantage of the associated full software package SpirVIEW which gives you a ready-to-use system of the shelf.
SPIR-Explore can be configured with both NaI and LaBr3 detector.
Data sheet
Contact
Stefan Mårtensson
- Sales - Radiation Detection
- Phone: +46 (0)18-566803
- Mobile: +46 (0)76-8265837
- stefan.martensson@gammadata.se
Technical specification
• Detectors: NaI(Tl) Ø32 x 51 mm or LaBr3(Eu) Ø25 x 32 mm + 2 GM tubes (mid and high range)
• Energy range: 20 keV – 3 MeV
• Dose Rate Measurement range: 0,001 μSv/h to 10 Sv/h
• Angular effect: < 20% over 270° horizontal and vertical (Cs-137)
• Detection capability: better than 0,1 μSv/h increase over 0,1 μSv/h BKG in 2s
• Spectrometry: 1024 channels
• Acquisition rate: 0,5s
• Throughput: 100 000 cps
• Spectroscopy range: up to 100 μSV/h
• Stability and linearity correction: 1 channel, or ≤ 2%
• Real time identification and mapping: SpirIDENT Suite software
• Supply voltage: typical 4,5 to 18 V
• Power consumption: ≤ 1 W
• DataI/O: 115 kBd RS232C link in logical level (3.3 V)
• Connector: miniature cylindrical push-pull 4 pins connector such as from LEMO
• Temperature Range: operation from -20 °C to 50 °C
• Humidity: must operate under 93% HR at 30 °C
• Protection class: IP54
• Dimensions: 250 x 131 x 81 mm (L x W x H)
• Fixation: 4 x M5 holes
• Mass: NaI(Tl) = 840 g, LaBr3(Eu) = 740 g
Related products
SPIRView
The SpirVIEW Mobile software provides a rapid unique map for a local and global radiological situation awareness. It centralizes the alarms from the...
R430 MUVE
The MUVE R430 is a radiation detector designed for unmanned aerial systems used to detect, locate, measure, map, and identify radioactive sources...
