Accessories (Radiation Detection)
Wide Area Test Source Beta - Sr-90
Wide area test source for contamination instrument check. Activity 200 Bq.
Calicheck Linearity test kit CRC
Performs linearity in <10 minutes Accurately simulates decay down to 10 µCi Results comparable to standard linearity tests
Marinelli Beakers
Marinelli beakers are used for gamma spectroscopy and have the advantage of enclosing the detector. It provides maximum measurement efficiency and...
PM-11 - gamma scint probe for RAM DA-2000
PM-11 sensitive 2″ x 2″ NaI(Tl) scintillation probe
CAP-Lift
Reduce hand exposure Facilitates lowering and raising of syringes or vials into the dose calibrator chamber remotely Operated by hand or foot...
Lead Shield 40 mm for CRC-series
This lead shield will reduce background radiation more than 10 times. Fitting any Capintec CRC dose calibrator with a remote ionization chamber....
RDS-32 Radiation Monitoring Alarm Box
Place the radiation protection instrument RDS-32 or RDS-MED in the enclosure and you get permanently mounted monitoring. It can also be made mobile...
Telescopic pole to RDS-32
Telescopic rod that ensures good distance to the source or an opportunity to access tight spaces. The item only refers to the telescopic rod with...
Rack for storage of DMC 3000
Rack for storing DMC 3000 dosimeters on the wall, holds 10 or 40 pcs of DMC 3000. Suits also DMC with module
CRC-55 to PC communication software
CRC PC Communications software will allow for faster and easier data acquisition and storage to your computer. Measurement data, including isotope...
CSW configuration software for RDS-30 and RDS-80
RDS-CSW software for parameter setting of RDS-30/40/80 handheld instrumet from Mirion
CSW-32 configuration software
CSW-32 configuration software for setting and calibrating the RDS-32 using a PC. USB-cable with Binder connector 1233-333 included. Examples of...
CSP cables
CSP Cables in different design and lengths to connect to PC and instruments (Colibri, Avior, RDS-32, RDS-Med, Radiagem, MIP-10)
Mobile cradle RDS-32 with 230V power supply
A plastic holder with power supply for RDS-32. With 230V power supply charging via 2 pins inside the holder. Mount the holder in the back with a...
