PM-10 – thin low energy gamma scint probe for RAM DA-2000
Tarvitsetko apua?
Autamme sinua löytämään oikean ratkaisun. Tarjoamme tukea, huoltoa, kalibrointia ja koulutusta kaikista tuotteistamme. Ota yhteyttä palvelusopimusta varten!
Huolto & Korjaukset Tarjouspyyntö
- Perfect for Iodine measurement I-125
A low voltage interface connects the RAM DA 2000 monitor with the probe.The PM-10 contains a highly efficient, hermetically sealed, NaI(Tl) scintillator, 2″ diameter and 0.04″ thick, coupled to a 2″ photomultiplier tube. This is encased in a rugged, splash proof housing for protection against shock, vibration and humidity. The probe also contains a high voltage power supply, single channel analyzer, pulse shaper, GM saturation indicator, detector identifier and malfunction detection circuitry. This configuration minimizes noise, improving sensitivity and stability.
Ota yhteyttä
Stefan Mårtensson
- Myynti - Säteilymittaus
- Puhelin: +46 (0)18-566803
- Matkapuhelin: +46 (0)76-8265837
- stefan.martensson@gammadata.se

Tekniset tiedot
Radiation Detected: Low energy gamma, 10keV to 80keV
Scintillator: NaI(Tl) 2″ diameter, 0.04″ thick. Window of 1 mm aluminum
Energy Calibration: SCA within the energy range ±5keV (minimum)
Count Rate Range: 0 – 50,000 cps
Output Signals: TTL pulses.
Detector status: ID, OK, malfunction, overflow
Temperature Range: Operation: -10oC to +50oC
Storage: -20oC to +60oC
Humidity Range: 40% to 95% RH (non condensing)
Dimensions: 290mm length 70mm (2.8″) width
Weight: 1.25kg
Casing: Aluminum, splash proof