Accessories (Radiation Detection)
Floor Trolley LB124-300 and LB 124 Scint
Floor trolley to LB 124-series for contamination survey on the floor. Trolleys are available to different number of instruments. Part 49826 = one LB...
RDS-32 Radiation Monitoring Alarm Box
Place the radiation protection instrument RDS-32 or RDS-MED in the enclosure and you get permanently mounted monitoring. It can also be made mobile...
GMP cables to RDS-32/31
Cables for GMP probes connected to RDS-MED and RDS-32. With Ikelite (at GMP) to Binder (at RDS) contacts.
TELE-GMP - Telescopic pole to RDS-32
Telescopic pole in carbon fiber that ensures a good distance to the radiation source or the possibility of accessing narrow spaces. The article only...
Marinelli Beakers
Marinelli beakers are used for gamma spectroscopy and have the advantage of enclosing the detector. It provides maximum measurement efficiency and...
CRC-55 to PC communication software
CRC PC Communications software will allow for faster and easier data acquisition and storage to your computer. Measurement data, including isotope...
CAP-Lift - pneumatic vial lifter
CAP-Lift is a pneumatically driven system for the transfer of vials or syringes to the measuring position in the dose calibrator ionization...
Calicheck Linearity test kit CRC
The Calicheck linearity test attenuates Tc-99m by known values simulating the decay for a range of a few hours up to 4 days. The 7 color-coded,...
Optical Grease
Optical Grade Silicone Grease is a clear and colorless optical coupling compound having moderate viscosity and providing excellent transmission...
LB 124 adapteri pyyhkäisynäytteelle
Adapteri pyyhkäisnäytteiden mittaamiseen.
Chamber Well Insert for Capintec dose calbrator
An extra chamber well insert which can easily be removed for washing and decontaminate. The chamber well insert is made of clear plexiglas. Suits...
Rack for storage of DMC 3000
Rack for storing DMC 3000 dosimeters on the wall, holds 10 or 40 pcs of DMC 3000. Suits also DMC with module
CSW-32 configuration software
CSW-32 configuration software for setting and calibrating the RDS-32 using a PC. USB-cable with Binder connector 1233-333 included. Examples of...
Captus Neck phantom
The CAPTUS neck phantom is made of clear Lucite designed to represent a patient’s neck. The phantom has a two part insert that allows counting...
CSP cables
CSP Cables in different design and lengths to connect to PC and instruments (Colibri, Avior, RDS-32, RDS-Med, Radiagem, MIP-10)
Moly Assay Canister for CRC
Fits all of Capintect’s dose calibrators in CRC-series. Designed for measurement of Tc-99m vials. The kit has a lead canister and a wire basket...
GM-42 - low range gamma probe
The GM-40/41/42 series of detectors are designed to measure gamma radiation over a very wide range. The GM-40/41/42 detectors are encased in a...