Mirion CSP probes
CSP probes are completely “stand-alone”. This means that CSP probes may be used with any Mirion read-out unit, including Colibri, RDS-MED, RDS-32, Avior or MIP 10 Digital
The CSP philosophy defines the probe as “independent” and does not need a “matched pairs” readout unit. In addition, using the CSPS software, a CSP probe can be directly connected to a PC for calibration purposes, or just to test the response of the probe, or set its alarm setpoints. This connection to a PC can be made via a wired USB cable, or even wireless via any of the CSP-COM accessories that fit on the back of the probe.
SN-D-2 neutron probe
SN-D-2 is a neutron ambient dose-rate H*(10) probe that connects to CSP compatible meters/systems and CSP meters. It leverages all CSP benefits and...
SABS-579
Large area probe for floor sweep alpha/beta contamination monitoring. It has a mechanical design to fit a floor sweeper. Use with CSP datalogger such...
SN-S neutron probe
The SN-S is a light weight neutron probe designed for neutron surveys. The SN-S is compatible with all CSP family instruments, including CSP-COM. The...
TELE-STTC-2 Telescopic probe
Tele STTC 2 allowing the operator to obtain measurements at increased distances and to reach hard-to-reach places. The telescopic pole can be...
SX-2R
The SX-2R probe for measurement of leakage and surface contamination is designed to be used with any CSP survey meter. Its 1.5” NaI(Tl) detector...
SAB-100
The SAB-100 probe could be used with any CSP survey meter or device that can handle CSP protocol. Its a phoswich detector with 100 cm² for direct...
SABG-15+ Pancake
The SABG-15+ is a part of the CSP (Canberra Smart Probe) and designed for the measurement of surface contamination. Detects alpha, beta and gamma...
SABG-100
Alpha/Beta/Gamma surface contamination measurement 100 cm² Phoswich scintillation detector Belongs to CSP family Calibration via PC Easy removable...
AB-100 - CSPevo
AB-100 is a detector module for alpha and beta in the CSPevo series, which is a family of probes with improved properties and ergonomics compared to...
SVLD
The SVLD probe for measurement of Very Low Dose equivalent rate is designed to be used with CSP meters such as Colibri or Radiagem
SVHD water proof high dose rate probe
SVHD (/W) is designed for measurements of very high dose rates (gamma) up to 1000 Sv/h in H*(10), specially designed for the extreme dose rates found...
CSPS - configuration software
The CSPS platform talks directly to the probe and makes it available (setup and calibration) to host instruments (Meter or PC) for further use in the...
STTC
STTC is a wide range gamma dose CSP probe. It uses to Time-To-Count algorithm. Cables has to be ordered separately. STTC-W Waterproof version for...
SAB-250
The SAB-250 probe for measurement of surface contamination is designed to be used with any Mirion survey meter. Its phoswich detector with 250 cm²...
SG-2R
The SG-2R probe for gamma measurement is designed to be used with any CSP™ survey meter. Its very good sensitivity makes it ideal to detect gamma...
SB-100
The SB-100 probe for measurement of surface contamination is designed to be used with any CSP survey meter. Its thin plastic scintillation detector...
CSP-COM
The CSP-COM module is perfect for remote monitoring applications, monitoring radiation in hot zones without human intervention or to centralize data...
SPAB-15 - PIPS detector
The SPAB-15 probe for measurement of surface contamination is designed to be used with any CSP meter, like Colibri, RDS-32, Avior and MIP-10. Silicon...
SA-32 Alpha Probe
Alpha surface contamination measurement 32 cm² ZnS(Ag) scintillation detector Belongs to CSP family Calibration via PC software Robust screwed-on...
SG-1R
The SG-1R probe for gamma measurement is designed to be used with any CSP survey meter. Its good sensitivity makes it ideal to detect gamma...
SAB-32
Alpha and Beta surface contamination measurement 32 cm² ZnS(Ag) scintillation detector Belongs to CSP family Calibration via PC...
CSP-PL Programming Library
With CSP-PL Programming Library, CSP probes can be connected directly to a PC without the need for a survey meter. Measurements can be directly...
SA-100
The SA-100 probe for measurement of alpha surface contamination. Its thin plastic scintillation detector with 100 cm² detection area for measurement...
